Enclosure Systems India Private Limited

PROTEC enclosures have a modern and highly attractive square design with soft contours. As a result, these wall-mount and desktop housings are ideal for modern electronics applications, both indoors and outdoors.

·        three sizes 140 / 180 / 220, each in the following versions:
Version I
With a deep recessed interface area at the rear of the enclosure for the installation and protection of connectors, interfaces, switches and cables. 
Version II
As version I, but also with a snap-on cover for flush covering of the recessed interface area.
Version III
As version I, but with a deep cover for the recessed interface area which is fitted by screws. The deep cover provides additional internal space for the electronics, cabling and connections.

·        front operating panel ergonomically inclined by 20°

·        recessed operating area for protecting a membrane keypad

·        plenty of space for touch screens (PROTEC 140: 5.7"/14.5 cm, PROTEC 180: 7"/17.8 cm, PROTEC 220: 8.4"/21.3 cm)

·        no visible fixings screws, all fixings hidden on the underside 

·        high-quality V-0 material in off-white (RAL 9002) and optional IP 65 protection class (sealing as an accessory) for tough applications

·        sealed electronics compartment with 3 board levels; plenty of space for the components and assemblies

·        concealed, flush wall mounting with removal prevention feature (accessory wall suspension element)

·        corrosion-free stainless steel screws with reliable Torx heads

·        non-slip rubber feet ensure that desktop devices do not skid

Additional Information:

• Delivery Time: 3 Weeks

• Building management
• Central control units
• IoT/IIoT  
• Smart Factory
• Industry 4.0 
• Gateways 
• Data acquisition systems
• Data systems engineering
• Measuring and control technology
• Supervision terminals and access control
• Medical and wellness technology

NET-BOX plastic enclosures have a slim design and stylish curved top section, this makes these modern and elegant housings perfect for wall mounted control units, network nodes and much more.

·        three sizes with plenty of room for electronics and interfaces

·        the connectors and cables are hidden under the front lid

·        the cases are moulded in flame retardant material and can be sealed to IP 65 for outdoor applications

·        simple three part assembly - bottom part, front cover and front lid; there are no visible screws on the front, just two on the underside of the lid

·        screw pillars are provided in the bottom part for mounting PCBs and assemblies

·        optional infill covers close the underside opening and can be used for fitting additional PCBs or assemblies

·        three point wall mounting system - no need to open the main electronics section, only the front lid has be refitted after installation (version II already has openings in the bottom part) 

·        supplied with anti-tamper Torx T10 assembly screws

·        NET-BOX cases can also be used as desktop units, accessory non-slip feet are available

Additional Information:

• Delivery Time: 3 Weeks

DESKTOP HOUSING & KEYBOARD HOUSING
These plastic enclosures are suitable for indoor applications in many different fields of electronics. Choose a case that will fully meet your requirements in terms of size and inclination of the control panel.

·        desk cases with inclined operating area

·        suitable for numeric keypads and membrane keyboards

·        useful range of five different models

·        prepared for the assembly of eurocards 100 x 160 mm (types 138/190/190F/190H)

·        front panel versions are available for the installation of complete prefabricated electronic assemblies

·        connector mounting panel (types 220 & Combi F/H)

·        version with attachment for digital readouts, measuring equipment, encoders etc. (Combi Desk Case H)

·        protection class IP 40

·        wall suspension element as accessory

·        internal screw pillars for PCBs etc.

·        Systems for data collection on the job and machines

·        Communications equipment

·        Access and security controls

·        Data systems engineering

·        Medical, wellness and laboratory technologies

·        Industrial control and point-of-sale devices

Additional Information:

• Delivery Time: 3 Week

WALLMOUNT ENCLOSURES & WALL MOUNT ENCLOSURES & DESKTOP ENCLOSURE

• Data acquisition systems
• Access and information terminals
• Point-of-sales devices
• Building installations
• Data systems engineering
• Communication
• Analysis diagnostics and therapy applications
• Measuring and control
• Industrial regulation

Our innovative UNITEC enclosures provide users with two operating panels at different inclinations, for face to face applications.

·        generously dimensioned dialogue areas inclined by 72° and 18° for face to face electronic devices; for example, user inputs data on the top and another person reads the displays/printouts on the front face

·        highly attractive contoured design suitable for desktop and wall mounted applications

·        two sizes, each with twelve versions

·        recessed areas 0.6 mm (labels) or 1.4 mm (membrane keypads) deep on the front part and on top part

·        uniquely, it is possible to have an all over product label

·        versions with battery compartment for 3 or 5 x AA cells

·        flexible component mounting; PCBs can be positioned in the bottom, top and front parts; screw pillars integrated

·        electronics and interfaces can be installed as complete packages, top and front part are at right angles to each other

·        protection class IP 40

·        hidden wall mounting in different orientations, separate wall suspension element (accessory)

·        Data acquisition systems

·        Access and information terminals

·        Point-of-sales devices

·        Building installations

·        Data systems engineering

·        Communication

·        Analysis diagnostics and therapy applications

·        Measuring and control

·        Industrial regulation

Additional Information:

• Delivery Time: 3 Weeks