Enclosure Systems India Private Limited

HANDHELD ENCLOSURES
WIRED ENCLOSURESWALLMOUNT ENCLOSURES & WALL MOUNT ENCLOSURES & DESKTOP ENCLOSURE & IIOT ENCLOSURES

CARRYTEC plastic enclosures are unique in offering a functional handle for many different tasks and situations, indoors and outdoors.

·    integrated handle with soft insert for perfect, non-slip grip

·   CARRYTEC M in a slim enclosure version for mounting tablets etc.

·    handle located above the centre of gravity for balanced carrying

·    rear can be installed on a tripod or support arm systems for fast positioning and alignment of the viewing and operating panels, and orderly cable management

·        especially large surface area that is ideal for user interfaces (S: 8,4"/21 cm; M: 10,4"/26 cm; L: 13,4"/34 cm)

·        ample installation depth and plenty of room for interfaces, yet slim appearance

·        interfaces are protected by inset areas on the underside

·        secure storage on table stand and/or wall suspension element; easy transmission of data and charging current, contacts as accessories (except slim enclosure version)

·        holding clamp for round tubes and rails according to DIN EN ISO 19054

·   available moulded in impact resistant plastic material, and darker colours, for tough/dirty conditions indoor or outdoor

·        protection class IP 54 with sealing (accessory)

·        recessed operating area for protecting the membrane keypad

·        the enclosures are easy to clean

·        a battery compartment for 5 x AA cells can be fitted (machining required)

·        optional protection bags for carrying probes, sensors, cables etc. (sizes S and M)

·        internal fastening pillars for PCBs

Unique variety of possible uses: mobile – desktop – wall mounted – rail mounted – round tube – tripod – suspension arm.
Depending on the application (indoor/outdoor) this innovative enclosure is available in different materials, e.g. high-impact plastic material in darker colours for tough conditions.

· Medical, e.g. emergency systems, monitoring and alarm equipment

· Diagnostics, therapy, laboratory devices

· Test and measurement equipment

· Communication technology

· Mobile terminals, data collection units

· Energy management systems

· Sensors

· Industry 4.0, smart factory

· Machine building and construction equipment

· Agricultural economics, forestry

The ART-CASE plastic enclosures series sets new standards for design and function with four uniquely contoured shapes: “round”, “square”, “oval” and “edge”

·        attractive eye-catching design for indoor electronics used in the living and working environments

·        four designs in two standard colours

·        huge range of possible combinations for mobile, desktop, wall or ceiling mounted applications

·        order the basic case then select either a bottom lid or base section

·        top convex (H) or flat with recessed area (F)

·        lid screw fitted to the bottom

·        base 30° or 55° inclined for user-friendly installation and assembly angles

·        base level spacer for ceiling/wall mounting, incl. supports 2 x AA and strain relief

·        Euro plug module according DIN VDE 0620 part 101

·        battery compartment for 2 x AAA cells (accessory)

·        protection class IP 40

·        internal fastening pillars for PCBs etc.

Ideal indoor electrical and electronic applications, e.g.

·        Transmission and reception units in building services management systems and building installations

·        Medical technology, health care 

·        Computer peripherals

·        Security technology

·        Sensors, optoelectronics

Additional Information:

• Delivery Time: 3 Week

Highly innovative modular plastic enclosures system which can be configured to meet all the requirements of today’s man-machine interfaces.

·        aesthetic and ergonomic design

·        uniquely, the operator can decide to use the electronics as a mobile or as a stationary unit

·        plenty of space for operating elements, graphic displays and touch screens (S: 6.4"/16 cm, M: 8.4"/21 cm, L: 10.4"/26 cm)

·        available with either flat or high bottom part for individual installation configurations, interfaces, cable inputs and outputs etc.

·        optional front panel styles: ABS cover and flat panel, aluminium front panel and glass panel for touch screens 
installation of tablets on demand 

·        protection class IP 54 with sealing gaskets (accessory)

·        internal fastening pillars for PCBs and components

·        ordered as individual components for multiple configurations:

·        mobile (1)
with/without battery compartment (5 x AA), accessible from the outside, incl. protection against incorrect insertion as well as anti-rotation device; user-friendly design with attractive flat styling in the handle area; finger recesses on the underside ensure a secure grip

·        enclosures with base or flat wall suspension element (2) 
for data transmission and charging the enclosure snaps into base or flat wall suspension element; contacts available as accessories; operating panel can be mounted either vertically or horizontally; the ergonomically inclined base offers plenty of space for electronics

·        desk-top screwed (3) 
operating panel inclined by 20° whether vertically or horizontally mounted; hidden screw fixing; the ergonomically inclined base offers plenty of space for connectors and cable glands; rubber feet supplied with the case ensures non-slip desktop positioning

·        desk-top/wall mounting, secured  by latch lock (4) 
unique interface between a stationary and a mobile component; simplified assembly by snap-in interfaces; the ergonomically inclined base offers plenty of space for plug connectors, electronics as well as wiring; base freely accessible; direct wall mounting of the base; mobile unit can be mounted either vertically or horizontally

·        installation enclosures (5)
if the architectural standards are particularly high, i.e. in historically buildings,
INTERFACE-TERMINAL enclosures can also be harmoniously integrated in walls or front panels; installation in plant and machinery is also possible; easy wall installation with installation assembly kit

Additional Information:

• Delivery Time: 3 Weeks

WALLMOUNT ENCLOSURE & 

• Mobile data recording and transmission
• Medical and laboratory
• Measuring technology
• IoT/IIoT
• Storage and sales logistics
• Digital open and closed-loop control technology
• Health and wellness equipment

These highly attractive tablet style enclosures are especially suitable for living and working environments – ideal for communication and network equipment.

·        modern, flat enclosure design for wall mounted and desktop electronics

·        central control panel for mounting a keypad, touch screen or display unit

·        recessed area for installation and protection of interfaces, plug-in connections, cable glands etc.

·        easy, invisible wall mounting; knockouts in base for wall fixings

·        four sizes in two colours

·        DIATEC XS: two-piece case, consisting of a top and bottom part, screwed together, integrated battery holder for 2 x AA, pre-shaped flush-mounting box contoured in the bottom part

·        DIATEC S, M, L: four-piece case, consisting of a top and bottom part as well as two covers for concealing the assembly screws; if required, the snap-on covers can be locked to prevent unauthorised access; integrated battery compartment for 2 x AA or 1 x 9 V

·        slot-in panels (accessories) can be used to separate the electronics and terminal areas

·        protection class IP 40

·        snap-on side panels allow installation without disassembly of the top panel  (S, M, L)

·        hinged lids in solid ABS, and translucent or transparent polycarbonate  (accessories S, M, L)

·        internal screw pillars for mounting PCBs

·        Peripheral equipment for computers

·        IoT/IIoT

·        Gateways

·        Data system engineering

·        Systems for data collection on the job

·        Access and security controls

·        Measuring and controlling devices

·        Medical, wellness and laboratory technology

Additional Information:

• Delivery Time: 3 Weeks

WALLMOUNT ENCLOSURES

Our FLAT-PACK CASES offer simple and low-priced enclosures for your electronics.

·        large range of sizes and versions for table-top and wall mounting

·        robust construction with tongue & groove design

·        the bottom parts are open at the sides and are thus particularly useful for all installation and service work

·        with low (N) and high (H) top part

·        versions with handle bar for ergonomic operation or easy carrying

·        with ventilation slots for components dissipating high heat (189 L)

·        with slots on the top for miniature appliances with sound signal (120 S)

·        type A models with aluminum front panels; operating elements are protected by a raised edge on the case

·        protection class IP 40 (version without slots)

·        internal screw pillars for PCBs etc.

Universal enclosures for electronic and electrotechnical devices, e.g.

·        measuring and control instruments

·        medical

·        wellness and laboratory equipment

·        and computer peripherals etc.

Additional Information:

• Delivery Time: 3 Week

WALLMOUNT ENCLOSURES & WALL MOUNT ENCLOSURES & DESKTOP ENCLOSURE

As enclosures for terminal installations, as well as for electronics equipment, the IN-BOX series offers versatile options for electrical and electronics engineers.

·        nine base enclosures with high gloss surfaces and different heights

·        two standard materials: ABS (UL 94 HB) or PC (V-2);
the complete enclosures in PC comply with fire safety standard UL 94 5V (better than V-0), although the material only has the classification V-2

·        high protection classes IP 66/67; sealing gasket pre-foamed in the top

·        high impact strength IK07 (ABS) and IK08 (PC)

·        top parts in case colour or transparent

·        efficient quarter-turn lid screws in stainless steel

·        recessed operating area for protecting a membrane keypad or decorative foil/label

·        direct wall mounting or exterior wall mounting with wall mounting brackets; if required an internal hinge kit can be supplied as an accessory

·        optional security kit for use with lead tags

·        DIN rails and mounting plates for individual installation and configurations

·        internal screw pillars for PCBs, DIN rails and mounting plates

·        Ideal for industrial electronics such as digital and analogue instruments, sensors, interfaces and security systems.

·        Also, for electrical applications such as heating, climate and ventilation systems, machine building and construction equipment.

·        Smart Factory / Industry 4.0

Additional Information:

• Delivery Time: 3 Weeks

WALLMOUNT ENCLOSURES

Modern, flat styling characterises the COMTEC family of plastic enclosures. Rounded surfaces give the users a soft feeling and emphasize the ease of use.

·        ergonomic keypad enclosures with operating face inclined at 10°, a real asset when operating and reading

·        large area for interfaces at the top, ideal for D-sub-plug connectors, round connectors etc.

·        ideal for desktop or wall mounted electronics

·        seven sizes, two colours

·        flat or raised bottom part for large-volume components

·        version I without battery compartment lid

·        version II with battery compartment lid

·        screw-in battery cradles 4 x AA, 1 x 9 V or 2 x 9 V cells are ordered separately for  versions II  cases

·        recess in top for a membrane keypad or label

·        protection class IP 40

·        self-adhesive case feet ensure reliable desk-top positioning

·        wall suspension element as accessory

·        internal fastening pillars for PCBs and components

·        Data collection terminals

·        Communications devices

·        Access control

·        Security

·        Medical, laboratory, wellness

·        Health care

·        Point-of-sale systems

·        Measuring and controlling

·        Industrial regulation

Additional Information:

• Delivery Time: 3 Weeks